Part Resources
Thread Starter
|
Senior User
Joined: Jan 2010
Posts: 432
Likes: 0
From: MASS
Part Resources
I have been gathering up my resources for when it comes time to start work on my truck. Having looked at sponsors of FTE and goggle searches, I come up with the following for online:
LMC Truck
National Parts Depot
Jeff's Bronco Graveyard
Dennis Carpenter
Blue Oval Truck Parts
Am I missing any other obviouse ones that you guy's use? Add it here if you would, so all us new guy's can search the sites before asking here on the forum where we might get stuff!
LMC Truck
National Parts Depot
Jeff's Bronco Graveyard
Dennis Carpenter
Blue Oval Truck Parts
Am I missing any other obviouse ones that you guy's use? Add it here if you would, so all us new guy's can search the sites before asking here on the forum where we might get stuff!
Senior User
Joined: Feb 2009
Posts: 308
Likes: 0
From: Southern NM
I like to use RockAuto as well.They are good for hard parts like brakes,bearings and such.For performance parts you might want to use the usuals like Jeg's and Summit.The real guru on the 351m/400 engine is Tim Meyer.He keeps a website(TMI)and is a contributor on this site also.And,believe it or not,Amazon.I also want to compliment you on your truck and welcome you.Lots of good folks here,and much knowledge and experience.Please ask plenty of questions and pass along any tricks you have!
Cross-Country
Joined: Apr 2008
Posts: 83
Likes: 0
