My Bronco Lopes
#1
01-12-2010, 02:54 PM
Join Date: Oct 2009
Location: columbus texas
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
My Bronco Lopes
Hello everyone.
I have got a 92 eddie bauer bronco 351w e4od...... it idles up & down in drive and reverse at a dead stop. it runs great and all but in drive or reverse or 2 or 1 it idles from like 750 to 500 and back and forth fairly slow, maybe 2 seconds between 500 and 750.. in park and neutral it idles great at 750.......
What do you guys think is wrong?
I have got a 92 eddie bauer bronco 351w e4od...... it idles up & down in drive and reverse at a dead stop. it runs great and all but in drive or reverse or 2 or 1 it idles from like 750 to 500 and back and forth fairly slow, maybe 2 seconds between 500 and 750.. in park and neutral it idles great at 750.......
What do you guys think is wrong?
#2
01-12-2010, 03:41 PM
Hotshot
Pull codes and you will find out. Ford Fuel Injection has instructions using a piece of wire or a paper clip.
could be a vacum leak, tps issue or iac issue. just to name a few. Pull codes regardless of there being a CEL or not.
could be a vacum leak, tps issue or iac issue. just to name a few. Pull codes regardless of there being a CEL or not.
Thread
Thread Starter
Forum
Replies
Last Post
LARIAT 85
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
20
11-10-2011 07:11 PM