Trailer Wiring

Reply Subscribe

Thread Tools

Search this Thread

Mar 4, 2000 | 09:37 PM

Trail_Rider

Thread Starter

Fleet Mechanic

Joined: Nov 1999

Posts: 1,415

Likes: 0

From: Lower 48

Trailer Wiring

I know this isn't the right place to put this but I figure I'll get a better response from this forum. Here's the deal.

I have a trailer electric brakes. The connector is a 6 spade, with center ground connector. I originally wired it to match a 94 F250 with factory wiring harness. I have since gotten rid of the truck and lost the schematics. Can someone send me the schematics for this setup?

Thanks,
Trail Rider
trailridr(No Email Addresses In Posts!)

Mar 4, 2000 | 10:50 PM

jimp

Freshman User

Joined: Mar 2000

Posts: 47

Likes: 0

Trailer Wiring

as far as i know, the factory trailer wiring is the large round RV type 7 pole Polock connector. if yours is that, i'll send you the pinout.

jim.parry@trw.com

Mar 6, 2000 | 08:09 PM

Trail_Rider

Thread Starter

Fleet Mechanic

Joined: Nov 1999

Posts: 1,415

Likes: 0

From: Lower 48

Trailer Wiring

Yes that would be it. After I asked the question I found the answer elsewhere on the web and have it posted in the electrical section of this forum in case anybody else needs it.

Thanks,
Trail Rider