Shock Distribution
Thread Starter
|
Elder User
Joined: Oct 2009
Posts: 871
Likes: 1
From: New Albany, MS
Shock Distribution
I am curious to know what the three wires on the bottom of my distributor do. There is a connector on one end and on the distributor end their is just spade terminals to push into the connector. The wires colors don't match so I am not sure how to match the correct wires together if that makes sense. The motor is a 460 out of a 70 or 71 lincoln and the truck is a 79 ford f150.
Hotshot
Joined: Apr 2009
Posts: 14,333
Likes: 247
From: Stanley, VA
What color are the wires you are dealing with?
Usually the wires are black, orange and purple. They connect to the corresponding colors at the module. Black is ground and purple and orange are the pickup coil leads.
Usually the wires are black, orange and purple. They connect to the corresponding colors at the module. Black is ground and purple and orange are the pickup coil leads.
Thread
Thread Starter
Forum
Replies
Last Post
Woodsman_30350
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
6
May 25, 2007 04:35 PM
theiglookid
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
4
Feb 27, 2006 03:00 PM
