49 wiper linkage clips..HELP Please
Thread Starter
|
Trailering
Joined: Oct 2005
Posts: 22
Likes: 0
49 wiper linkage clips..HELP Please
Hi, I own a 49 F5
I dismantled my vacuum set up, got an electric motor for LAST xmas and am just now getting around to installing everything.
Trouble is, I have no idea how to attach the passenger side linkage to the motor. I lost that part/nut/connector and can't figure out what was supposed to go there. Right now the very short bracket has a 5 or 6 sided nut-like piece that spins freely on it, and the arm that goes across to the passenger side has a large hole in it.
Can you help me as to how the two connect?
And if so where i can find that bushing, clip or whatever?
I have pictures of the parts in my album
Thanks
bmaltb@yahoo.com
I dismantled my vacuum set up, got an electric motor for LAST xmas and am just now getting around to installing everything.
Trouble is, I have no idea how to attach the passenger side linkage to the motor. I lost that part/nut/connector and can't figure out what was supposed to go there. Right now the very short bracket has a 5 or 6 sided nut-like piece that spins freely on it, and the arm that goes across to the passenger side has a large hole in it.
Can you help me as to how the two connect?
And if so where i can find that bushing, clip or whatever?
I have pictures of the parts in my album
Thanks
bmaltb@yahoo.com
Last edited by bmaltb; Nov 29, 2009 at 12:58 AM. Reason: add pics
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 785
From: Simi Valley, CA
Hi, I own a 49 F5
I dismantled my vacuum set up, got an electric motor for LAST xmas and am just now getting around to installing everything.
Trouble is, I have no idea how to attach the passenger side linkage to the motor. I lost that part/nut/connector and can't figure out what was supposed to go there. Right now the very short bracket has a 5 or 6 sided nut-like piece that spins freely on it, and the arm that goes across to the passenger side has a large hole in it.
Can you help me as to how the two connect?
And if so where i can find that bushing, clip or whatever?
I dismantled my vacuum set up, got an electric motor for LAST xmas and am just now getting around to installing everything.
Trouble is, I have no idea how to attach the passenger side linkage to the motor. I lost that part/nut/connector and can't figure out what was supposed to go there. Right now the very short bracket has a 5 or 6 sided nut-like piece that spins freely on it, and the arm that goes across to the passenger side has a large hole in it.
Can you help me as to how the two connect?
And if so where i can find that bushing, clip or whatever?
Fits: 1948/66 all trucks / 1949/59 Passenger Cars (except T-Birds) / 1960/65 Falcon/Comet / 1961/64 Econoline / 1961/66 Thunderbird / 1962/65 Fairlane / 1967/79 C Series Tilt Cabs.
JOE HAYWARD FORD in Dallas OR has 9 = 503-623-8361.
HAVEN FORD SALES in Haven KS has 25 = 800-748-7803.
DON SANDERSON FORD in Glendale AZ has 29 = 623-842-8762.
PARTS INTERNATIONAL in Farmers Branch TX has 50 = 888-727-0418.
GREEN SALES CO. in Cincinnati OH has 55 = 800-543-4959.
Thread Starter
|
Trailering
Joined: Oct 2005
Posts: 22
Likes: 0
Thanks mucho Numbers
I'm sure I'll find it about a month after the replacement part arrives
Using your part number I found a picture using google here
http://www.melvinsclassicfordparts.c...ges_77-107.pdf
Using your part number I found a picture using google here
http://www.melvinsclassicfordparts.c...ges_77-107.pdf
Last edited by bmaltb; Nov 29, 2009 at 01:03 AM. Reason: new info
Thread
Thread Starter
Forum
Replies
Last Post
bmaltb
1948 - 1956 F1, F100 & Larger F-Series Trucks
1
Apr 26, 2007 08:53 PM
bmaltb
1948 - 1956 F1, F100 & Larger F-Series Trucks
6
Apr 5, 2007 01:01 PM
bmaltb
1948 - 1956 F1, F100 & Larger F-Series Trucks
7
Jul 8, 2006 08:13 PM
