Heater Questions
New User
Joined: Aug 2009
Posts: 12
Likes: 0
I have a factory AC 68 f250. I see your truck has been modified back to a original heater without AC. The two holes low on the floor board, toe board are from the original AC heater hoses. If the original ac unit was factory, you should have a large hole on the firewall about center near the top. 3" give or take.
I would look up the wiring for this thru - FORDification.com
They list and show the wiring for most of 67- 72. You can't print them out but sure helps. Look for the wiring from the fan switch to the heater box. ray
I would look up the wiring for this thru - FORDification.com
They list and show the wiring for most of 67- 72. You can't print them out but sure helps. Look for the wiring from the fan switch to the heater box. ray
Thread
Thread Starter
Forum
Replies
Last Post
