OCT.b/s session is in order!!
Thread Starter
|
Postmaster
Joined: Sep 2006
Posts: 4,525
Likes: 1
From: oh
OCT.b/s session is in order!!
Getting back from Carlisle and now headed to Williamsburg,Va. for a vacation and a trade-off since wife and I headed to the swap meet.
I have basically blasted/primed/painted the heck out of everthing this summer and ready for some down time.
WHAT ARE YOU GUYS UP TO?
I have basically blasted/primed/painted the heck out of everthing this summer and ready for some down time.
WHAT ARE YOU GUYS UP TO?
Lead Driver
Joined: Jan 2003
Posts: 9,893
Likes: 12
From: Ohio
Ok, this weekend will be the Hoo Ray of racing. Going to DW42 for their Halloween Thing(3 days) and then I'm done. Car will get torn down, not sure what I'll actually get done to it, but time will tell.
Been poking around the yard with buddys Bobcat getting some landscaping done. Don't have alot done, but it's a start for now. Cleaning out some areas that PO had "landscaping" done and now it's just a mess. Tearing it all out, seeding grass and keeping it simple. I've seen some really cool plans to build a front loader onto small tractors, so thinking I'll look into some material and build one for the ol Cub! PF-engineering.com is the place.
Not ready for winter......and it's coming on wayyyy too fast. Furnace has been kicking on for over a week now. Yuk. Did get some bodywork done to the 95 F150, fixed a couple places over rear wheels that blew out this summer. She's looking good again, building myself an oil sprayer so I can do the underneath/doors/tailgate and such. I got a 1.5 gal pressure paint pot and building my own gun and should work nice.
Been poking around the yard with buddys Bobcat getting some landscaping done. Don't have alot done, but it's a start for now. Cleaning out some areas that PO had "landscaping" done and now it's just a mess. Tearing it all out, seeding grass and keeping it simple. I've seen some really cool plans to build a front loader onto small tractors, so thinking I'll look into some material and build one for the ol Cub! PF-engineering.com is the place.
Not ready for winter......and it's coming on wayyyy too fast. Furnace has been kicking on for over a week now. Yuk. Did get some bodywork done to the 95 F150, fixed a couple places over rear wheels that blew out this summer. She's looking good again, building myself an oil sprayer so I can do the underneath/doors/tailgate and such. I got a 1.5 gal pressure paint pot and building my own gun and should work nice.
Cargo Master
Joined: Dec 2006
Posts: 2,511
Likes: 8
From: hinckley ohio
Got called for the Federal Grand Jury called in and im not needed.Need to call back on Oct 18 to see if im needed. Other then that my Brother picked up a wrecked 05 Focus so we are working on that as will as my 68 F100 (NOT GOING TO FAST)
Lead Driver
Joined: Jul 2003
Posts: 9,366
Likes: 1,726
From: AKRON ohio
Saturday was "tire" day here. Every year the township allows each homeowner to get rid of 8 tires. They have always taken a few extra from me 10-12 each year.
This year there was no limit and i was able to take 30 tires! I spent last Thursday over at my friends shop breaking down old rusty-nasty tires as they wont take them on rims, and since he is so busy i did 15 or so for him.
This really cleaned up my back yard! Now time to haul scrap! Get rid of these junky 56's!
Havent run the furnace YET! and it is cold in the house! No fire in the wood burner yet either! Lots of extra blankets.
Week ago Sunday I bought a trailer load of Farmall Cub tractor implements off craigslist, What a deal! belly mower, sickle mower, complete cultivators, 2 way plow, disc, and some misc parts all for $ 500.00. I bought it all just for the sickle mower and cultivators. I have a guy comming Friday to look at the plow, hope to move the rest before snow flies!
I changed my hours at work, I now work 4-10 hour days. this gets me Friday Saturday and Sunday off.
This year there was no limit and i was able to take 30 tires! I spent last Thursday over at my friends shop breaking down old rusty-nasty tires as they wont take them on rims, and since he is so busy i did 15 or so for him.
This really cleaned up my back yard! Now time to haul scrap! Get rid of these junky 56's!
Havent run the furnace YET! and it is cold in the house! No fire in the wood burner yet either! Lots of extra blankets.
Week ago Sunday I bought a trailer load of Farmall Cub tractor implements off craigslist, What a deal! belly mower, sickle mower, complete cultivators, 2 way plow, disc, and some misc parts all for $ 500.00. I bought it all just for the sickle mower and cultivators. I have a guy comming Friday to look at the plow, hope to move the rest before snow flies!
I changed my hours at work, I now work 4-10 hour days. this gets me Friday Saturday and Sunday off.
Thread Starter
|
Postmaster
Joined: Sep 2006
Posts: 4,525
Likes: 1
From: oh
lol.......Kevin ,Canfield and Carlisle swap meet is over,but I would have taken all your junk56 parts there.........GOOD FOR YOU and getting some yard work done. Hate them tall weeds......and parts dissapear in them...LOL
We have cleaned out the paint booth and blasting area,and getting all the trucks winter ready and then leaving for Florida.....but hate to see it get cold.
Bill
We have cleaned out the paint booth and blasting area,and getting all the trucks winter ready and then leaving for Florida.....but hate to see it get cold.
Bill
Lead Driver
Joined: Jul 2003
Posts: 9,366
Likes: 1,726
From: AKRON ohio
Brian,
The disc is 4-5 feet wide single gang. This is the fast hitch style for the cubs equiped with the fast hitch. Model F38
If you look on craigslist under farm and garden, farmall, you should find it. I have a pic there. I was asking $275 but I can do better for you. These farmall only attachments are getting HTF!
Waldord,
Swap meets are like a needle in a hay stack! I have done them in the past and online is way better! Plus I dont HAVE to load un load, I can keep the trucks together longer and only remove the part that someone needs. It just works for me.
If it unbolted and was in anyway useable it was saved. I can no longer save frames that have rusted off spring hangers, Cabs that have so much rust the DASH is rusted out etc. I still have 2 more to part out one 56 and one 55. I have the 55 in the shop now.
I'm going to use the front half of the dave boley frame to make a Y block run stand, with radiator, and I already have the switch/gauge panel built. Now when I get a junk yard engine I can at least run it to check vitals/comp etc.
Kevin Bigwin
The disc is 4-5 feet wide single gang. This is the fast hitch style for the cubs equiped with the fast hitch. Model F38
If you look on craigslist under farm and garden, farmall, you should find it. I have a pic there. I was asking $275 but I can do better for you. These farmall only attachments are getting HTF!
Waldord,
Swap meets are like a needle in a hay stack! I have done them in the past and online is way better! Plus I dont HAVE to load un load, I can keep the trucks together longer and only remove the part that someone needs. It just works for me.
If it unbolted and was in anyway useable it was saved. I can no longer save frames that have rusted off spring hangers, Cabs that have so much rust the DASH is rusted out etc. I still have 2 more to part out one 56 and one 55. I have the 55 in the shop now.
I'm going to use the front half of the dave boley frame to make a Y block run stand, with radiator, and I already have the switch/gauge panel built. Now when I get a junk yard engine I can at least run it to check vitals/comp etc.
Kevin Bigwin
Trending Topics
Lead Driver
Joined: Dec 2003
Posts: 6,773
Likes: 7
From: On the road in Ohio
Well it is the end of the racing season one last race to go, and since it is , the silly season is in full affect at our club...see smileys
and hopefully it will end on this note..
and hopefully it will end on this note..
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalytic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Cargo Master
Joined: Dec 2006
Posts: 2,511
Likes: 8
From: hinckley ohio
the fall foliage tour is happening here in Medina this week end if any one is interasted its a good time its basicly covering Wadsworth ,Seville and Rittman area but starts in Lafayette on rt. 162.
Thread Starter
|
Postmaster
Joined: Sep 2006
Posts: 4,525
Likes: 1
From: oh
Nice and warm in Virginia......hate to head back home. I like to check out the fall foliage also. Maybe another trip in order after we get home.
Boleys old frame was mine. It was really rusty. It might make a good test table for what it's worth. I need to see Boley myself soon.
Bill
Boleys old frame was mine. It was really rusty. It might make a good test table for what it's worth. I need to see Boley myself soon.
Bill
Thread Starter
|
Postmaster
Joined: Sep 2006
Posts: 4,525
Likes: 1
From: oh
Heard it was windy last few days.....The leafblower will get a workout soon...LOL
Need to get pumpkin and some stocks for decorating, already have straw..when we redid the back field this summer.
Will start to wax and winterize all my trucks for the long snow days....yuk!! To think about snow really does suck.....but a few weeks of it keeps me happy.
Covered Bridge Festival this weekend and hope to be back by Sunday for that......Bill
Need to get pumpkin and some stocks for decorating, already have straw..when we redid the back field this summer.
Will start to wax and winterize all my trucks for the long snow days....yuk!! To think about snow really does suck.....but a few weeks of it keeps me happy.
Covered Bridge Festival this weekend and hope to be back by Sunday for that......Bill