Installing MBRP downpipe.
Thread Starter
|
Elder User
Joined: Mar 2005
Posts: 532
Likes: 0
From: azle texas
Installing MBRP downpipe.
Cody told me about a great tool to use on the firewall, to get it out of the way. Port-a-Power. I am going to take pics of the work. Problem though I got to looking at the MBRP DP and there is no flared end to match up against the exhaust pipe. How do I connect it to my exhaust?
Thanks Tony
Thanks Tony
Hotshot
Joined: Jun 2007
Posts: 10,008
Likes: 7
From: Austin, TX
have the same pipe and still don't like it. haha. but cody helped me install mine and we used his port a power.. LIFE SAVER!!!!!!!!!!!!!!!!!!! used the alligator jaws on the seam and was done in a jif. what i did with my DP is cut the flared end off the stock pipe about 2 1/2"- 3" up the pipe. wherever the size of the stock pipe is enough to go around the MBRP pipe snuggly. then welded it on the MBRP pipe. i have the welder and everything to do it if u need help, but i don't have the stuff to bend that seam out so im not much help there.
Thread
Thread Starter
Forum
Replies
Last Post
Robber80
6.0L Power Stroke Diesel
18
Aug 24, 2007 02:33 PM
