Fuses
Tuned
Joined: Mar 2007
Posts: 305
Likes: 0
From: Havana Fla
<TABLE border=0 cellSpacing=0 cellPadding=4 width=575><TBODY><TR><TD>
<SMALL>Does My Car Have OBD-II?</SMALL>
<SMALL>All cars and light trucks built and sold in the United States after January 1, 1996 were required to be OBD II equipped. In general, this means all 1996 model year cars and light trucks are compliant, even if built in late 1995.</SMALL>
<SMALL>Two factors will show if your vehicle is definitely OBD II equipped:
1) There will be an OBD II connector as shown below, and
2) There will be a note on a sticker or nameplate under the hood: "OBD II compliant".</SMALL>
The Connector
</TD></TR></TBODY></TABLE>
<SMALL>All cars and light trucks built and sold in the United States after January 1, 1996 were required to be OBD II equipped. In general, this means all 1996 model year cars and light trucks are compliant, even if built in late 1995.</SMALL>
<SMALL>Two factors will show if your vehicle is definitely OBD II equipped:
1) There will be an OBD II connector as shown below, and
2) There will be a note on a sticker or nameplate under the hood: "OBD II compliant".</SMALL>
The Connector
</TD></TR></TBODY></TABLE>
Hotshot
Joined: Dec 2003
Posts: 15,369
Likes: 121
From: Stuttgart, Ar
The connector under the dash where you plug-in to read trouble codes. If that fuse is blown then you won't be able to scan your truck.
Thread
Thread Starter
Forum
Replies
Last Post
bishopgeer
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
6
Jan 23, 2010 04:42 AM
