Question for NumberDummy-Axle Vent

Reply Subscribe

Thread Tools

Search this Thread

Aug 22, 2009 | 09:35 AM

old highboy

Thread Starter

7th Gear

Joined: Jun 2009

Posts: 7

Likes: 0

Question for NumberDummy-Axle Vent

I have a 1975 f250 4x2-is the rear axle vent bolt that holds the brake block still available? The local dealers don't have any books that go back that far. The vent is of type that has the crimped cap on it. I could also use the bolt that has the hose end on it if that is available. THANKS in advance,Mark

Aug 23, 2009 | 08:08 AM

78f250lj

Senior User

Joined: Nov 2001

Posts: 444

Likes: 0

From: Cleveland

I just broke mine on my 77 f250.......Napa did not have one....but I ended up buying a 7/16 bleeder screw and turned the end on my lathe. Worked good!

Aug 23, 2009 | 12:03 PM

mikeo0o0o0

Hotshot

Joined: Apr 2009

Posts: 14,333

Likes: 247

From: Stanley, VA

P/N your looking for is D1OZ-4022-A 73-75 F250 Before s/n W20,001 (7/16-20 x 2 1/8")
D6UZ-4022-A 75-77 After s/n W20,001 (7/16-20 x 1 25/32")
Note: D5TZ-4022-A replaced by D6UZ-4022-A