Neal on the rollers
Thread Starter
|
Logistics Pro
Joined: Mar 2007
Posts: 4,580
Likes: 838
From: knoxville, tn
Neal on the rollers
here is a nice video of neal churning out the black smoke at 413 hp!
http://www.youtube.com/watch?v=1flRt8_pRTw
http://www.youtube.com/watch?v=1flRt8_pRTw
Post Fiend
Joined: Apr 2007
Posts: 7,241
Likes: 1
From: Powder Springs, East TN
We have plenty of videos of everyone up on our Photo bucket page. He did 404 on TW tuning early in the morning then after live tuning with Jody and an extreme temperature jump he made 413
Post Fiend
Joined: Mar 2007
Posts: 9,010
Likes: 5
From: Johnson City, TN.
Funny guy there Joe.
Yup I turned 405 HP in the a.m. at 75° and then after live tuning turned 413 at 97°.
I think I could have done a tad better if I kept at it. I only ran one tune. I wish I ran a couple while I was up there.
Still not too bad numbers. Had a ball that weekend.
Yup I turned 405 HP in the a.m. at 75° and then after live tuning turned 413 at 97°.
I think I could have done a tad better if I kept at it. I only ran one tune. I wish I ran a couple while I was up there.
Still not too bad numbers. Had a ball that weekend.
Post Fiend
Joined: Mar 2007
Posts: 9,010
Likes: 5
From: Johnson City, TN.
egt's were not bad at all. I didn't watch them too close but I think they got up to 900 or so. Was really too busy watching other gauges. Just glanced over there to be sure it was not too hot.
Senior User
Joined: Jul 2006
Posts: 320
Likes: 0
From: Wisconsin
Neal, that's quite a bit of power, but to me your torque number seems a little low. Idk? At the local diesel shop near me with a dyno, the 7.3s in the low 400hp range are making around 900+ ft-lbs. Just thought I'd throw this out there and see if anyone has any explanations.
Update: Guess I should have read all of your other post first! Seems like others had the same thoughts I did.
Update: Guess I should have read all of your other post first! Seems like others had the same thoughts I did.
Trending Topics
Hotshot
Joined: Jul 2003
Posts: 12,177
Likes: 40
From: Newport, WA
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
10 Most Surprising 2026 Ford Truck Features!
Joe Kucinski
Post Fiend
Joined: Mar 2007
Posts: 9,010
Likes: 5
From: Johnson City, TN.
Neal, that's quite a bit of power, but to me your torque number seems a little low. Idk? At the local diesel shop near me with a dyno, the 7.3s in the low 400hp range are making around 900+ ft-lbs. Just thought I'd throw this out there and see if anyone has any explanations.
Update: Guess I should have read all of your other post first! Seems like others had the same thoughts I did.
Update: Guess I should have read all of your other post first! Seems like others had the same thoughts I did.
I agree but you never know. It coulda been the dyno, the weather or maybe I wasn't holding my nose just right. Nevertheless it was my first time on a dyno and I had fun. That's all that really mattered to me.
Fleet Mechanic
Joined: Mar 2007
Posts: 1,313
Likes: 6
From: Rio Rancho NM
Neal, As I already said - If you could somehow get your HP data below 2000 I'm betting your Tq numbers are way over 600. They HAVE to be, given the formula. Did you notice what your boost was?
Great job though! I love the cloud!
Great job though! I love the cloud!
Thread
Thread Starter
Forum
Replies
Last Post