New here
Thread Starter
|
New User
Joined: Aug 2009
Posts: 7
Likes: 0
From: Grand Prairie
New here
I have a 1967 Ford F100. When I turn the Hazards on, only the back ones blink and not the front. I have checked the wiring and fuses. Everything checks out. Also, put a switch in for the back up lights and the wire was hot but, when I connected the switch the lights came on and then went out. I have no power. Any ideas?ffice
ffice" /><O
></O>
<O></O>
ffice" /><O></O><O
></O>
Post Fiend
Joined: Feb 2000
Posts: 11,496
Likes: 6
From: Kansas
Welcome to the site Gary! 
Try this forum: https://www.ford-trucks.com/forums/forum39/ The folks in there can help you out. Also, be sure to drop in your state chapter: https://www.ford-trucks.com/forums/forum96/ The folks in there are really cool.
Try this forum: https://www.ford-trucks.com/forums/forum39/ The folks in there can help you out. Also, be sure to drop in your state chapter: https://www.ford-trucks.com/forums/forum96/ The folks in there are really cool.
Thread
Thread Starter
Forum
Replies
Last Post
woogs
General NON-Automotive Conversation
4
Dec 18, 2005 01:36 PM
