Bolt Specs...
Post Fiend
Joined: Jul 2005
Posts: 14,582
Likes: 12
From: 21791
m12x1.50, dont hold me to it, have you tried using the actual trans bolts? The long ones, the lower mounts you can thread through because they are open holes, but the two blind holes, cut some 3/4" pipe and shim it out, or washers work... I think head bolts work as well i have one of them in my block as we speak... err.. read?
Thread Starter
|
Elder User
Joined: Sep 2008
Posts: 595
Likes: 0
m12x1.50, dont hold me to it, have you tried using the actual trans bolts? The long ones, the lower mounts you can thread through because they are open holes, but the two blind holes, cut some 3/4" pipe and shim it out, or washers work... I think head bolts work as well i have one of them in my block as we speak... err.. read?
Just don't want 50 trips to the store... Thanks man
1/8 mile Oval Track
Joined: Dec 2007
Posts: 1,300
Likes: 0
From: Newport,Tennessee
Hey Kris, I like you avatar...
Thread
Thread Starter
Forum
Replies
Last Post
mikeyswood
Clutch, Transmission, Differential, Axle & Transfer Case
4
May 23, 2007 02:13 PM
jowilker
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
3
Feb 23, 2002 08:31 AM
thelonerangerxlt
1983 - 2012 Ranger & B-Series
2
Jun 1, 2001 11:09 PM
