Redneck Engineered Bulkhead.
Thread Starter
|
Elder User
Joined: Oct 2007
Posts: 541
Likes: 1
Redneck Engineered Bulkhead.
I figured, I do work my truck, and I do have a stack, and a need for a spare tire to be somewhere, so I went ahead, took some 1"x1" angle, made an upper and lower bracket, then took a piece of 3/4" plywood, a chainsaw, and the rest is, well...you'll see. The gray thing on the bed floor is another piece of 3/4" plywood covered with a plastic tarp to keep crap out of the folding gooseneck hitch. The setup works really well, and holds up to everything I've thrown at it so far.
Thread Starter
|
Elder User
Joined: Oct 2007
Posts: 541
Likes: 1
Heck, it works. Wait for my next installment (HAHAHA) when I build my home-made dump bed insert. Of course, that will be made of steel, although I'm sure I'll put stake pockets in so I can add sides.
Thread
Thread Starter
Forum
Replies
Last Post
nzirbel
Excursion - King of SUVs
12
Feb 6, 2015 08:50 PM
boilerbots
1948 - 1956 F1, F100 & Larger F-Series Trucks
12
Jul 27, 2006 02:56 PM
