I think Im going nuts
Post Fiend
Joined: Jun 2004
Posts: 8,147
Likes: 1
From: Joppa, Maryland
I wanted to do this when I used to have an '00 F150, but didn't work out. The frames on these trucks are fairly weak, but you can always box them in I guess. I bent the frame on mine after getting some air and nose diving into the pavement (oops). That might be above average abuse though..
Post Fiend
Joined: Nov 2003
Posts: 21,285
Likes: 15
From: Nutter Fort, WV
I watched two trucks get built last year.
This one went together real fast without thinking everything through.
This one the guy thought about every move before he made any decisions.
The white one did not work well, 24" lift with arched springs left little spring action, the springs were almost rigid triangles the arch was so high.
The yellow one on stock springs with custom spring hangers works very well, almost to well.
The white one went down the road this spring, the yellow one runs every weekend.
This one went together real fast without thinking everything through.
This one the guy thought about every move before he made any decisions.
The white one did not work well, 24" lift with arched springs left little spring action, the springs were almost rigid triangles the arch was so high.
The yellow one on stock springs with custom spring hangers works very well, almost to well.
The white one went down the road this spring, the yellow one runs every weekend.
Thread
Thread Starter
Forum
Replies
Last Post
OKrumple
1987 - 1996 F150 & Larger F-Series Trucks
7
Jul 4, 2013 09:59 PM
79 f-150 guy
1973 - 1979 F-100 & Larger F-Series Trucks
30
Jun 25, 2010 01:22 PM
FordF350Baby
1987 - 1996 F150 & Larger F-Series Trucks
6
Dec 5, 2009 06:41 AM
