79 302
Thread Starter
|
New User
Joined: May 2009
Posts: 1
Likes: 0
From: Monticello Mn
79 302
I have a 48 F1 pickup with 79 302 installed. The engine has no smog pump on it. After redoing top end I cant seem to find a edelbrock manifold made without the EGR valve that will work. I want to put top end back together without the EGR valve, and get rid of all the emissions. Is there a intake manifold that will work. Its a stock motor with a stock ford Carb.
Moderator
Joined: Dec 2003
Posts: 97,646
Likes: 2,012
From: Saskatoon, Saskatchewan
Welcome 48jay, it`s always great to meet another member with a 48!
Head over to the Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W) forum: https://www.ford-trucks.com/forums/forum55/ and the 48/60 forum: https://www.ford-trucks.com/forums/forum41/
As well make some noise in your local MN chapter too: https://www.ford-trucks.com/forums/forum86/
Be sure to fill in the location field in your profile soon.
Head over to the Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W) forum: https://www.ford-trucks.com/forums/forum55/ and the 48/60 forum: https://www.ford-trucks.com/forums/forum41/
As well make some noise in your local MN chapter too: https://www.ford-trucks.com/forums/forum86/
Be sure to fill in the location field in your profile soon.
Thread
Thread Starter
Forum
Replies
Last Post
