Hi,

i need your help. I start to fix my F-1 but the last owner remove all parts from the emergency brake He cut the cable and i have no idea how to istall it right.
Now i need pictures all you have about this... My F-1 is build 51. I hope somebody can help me

greetings from germany...
Dirk

 

Hope this helps. On the rear wheels you'll need parts 2A601, 2A637/38, these are the parts that engage the brakes via the parking brake cables. If your parking brake system was removed I'm pretty sure they took this parts out:

 

Willkomen! Here's a pic of the bellcrank assembly, your best bet by far would be to get a complete assembly from someone who is parting out a truck. The assembly bolts to the underside of the crossmember just ahead of the rear axle.

 

[QUOTE=ALBUQ F-1;7376518]Willkomen! Here's a pic of the bellcrank assembly, your best bet by far would be to get a complete assembly from someone who is parting out a truck. The assembly bolts to the underside of the crossmember just ahead of the rear axle.

I bet that would be fun in Germany, can't be too many guys over there with Bonus Builts, and fewer parting them out.

We all like challenges, or else we wouldn't be doing this!

 

Hello!

I addition to Bobs drawings and Ross' pictures, these pictures from my 51 F1 might help as well:





And the adjustment procedure is in this thread, post #6:

https://www.ford-trucks.com/forums/7...o-bracket.html

Good luck!