Pulling cam
Thread Starter
|
Post Fiend
Joined: Nov 2001
Posts: 14,947
Likes: 6
From: Topsfield, MA
Pulling cam
Anyone ever pulled their cam on one of these trucks with a small block?
I gotta pull the cam out of my 393w and I've never pulled one with it in the truck before. Did you have to pull the a/c condenser out as well? Any other tips?
I gotta pull the cam out of my 393w and I've never pulled one with it in the truck before. Did you have to pull the a/c condenser out as well? Any other tips?
Thread Starter
|
Post Fiend
Joined: Nov 2001
Posts: 14,947
Likes: 6
From: Topsfield, MA
I was able to get the cam out by taking the grille off and unbolting the condenser from it's mounting bracket. I had the compressor zip tied to the drivers side fender area and I simply lifted it up and tilted it enough that I could get the cam in and out from the front of the grille area....worked out quite well. I did not have to disconnect and remove the condenser.
Thread
Thread Starter
Forum
Replies
Last Post
Joe mollnow
Y-Block V8 (239, 272, 292, 312, 317, 341, 368)
5
Nov 29, 2007 09:08 AM
Raptor119
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
6
Oct 16, 2007 08:51 PM
fordeverpower
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
4
Aug 19, 2004 09:04 AM
