mounting brake controller
New User
Joined: Mar 2002
Posts: 3
Likes: 0
From: Canada
mounting brake controller
I too am looking for a good spot to mount the controller. I just picked up my 2002 F150 last Wednesday and I am installing my fifth wheel hitch and controller this week. Has anyone tried mounting it in the small storage bin on the lower right side of the steering column? It just doesn't seem like there are an other logical places to mount them.
Hggt
2002 F150 S/C XLT 7700 Grp B
5.4 l 4.11
Dark Highland Green & Arizona beige
Hggt
2002 F150 S/C XLT 7700 Grp B
5.4 l 4.11
Dark Highland Green & Arizona beige
FTE Leadership Emeritus
Joined: Sep 2000
Posts: 7,298
Likes: 45
From: Southern California
mounting brake controller
Check this [link:www.ford-trucks.com/dcforum/DCForumID1/258.html|thread]. A member describes how he mounted a Prodigy controller in the cubby hole of his F350. There was a photo, but it doesn't show up now.
FWIW, the Tekonsha Prodigy and Sentinel can be mounted from 0-90 degrees. A friend of mine has his controller mounted on the curved underdash of his '97 F150.
Whatever brand controller you are installing, the instructions should tell how much angle is acceptable.
FWIW, the Tekonsha Prodigy and Sentinel can be mounted from 0-90 degrees. A friend of mine has his controller mounted on the curved underdash of his '97 F150.
Whatever brand controller you are installing, the instructions should tell how much angle is acceptable.
Fleet Mechanic
Joined: Feb 2001
Posts: 1,290
Likes: 15
From: Toronto, Canada
mounting brake controller
Same deal as Edmo's, little different angle. Be careful if you have a 6 speed. My shifter comes an inch from my controller.
http://members.rogers.com/mattjibb/prodigy.jpg
http://members.rogers.com/mattjibb/prodigy.jpg
Senior User
Joined: Dec 2001
Posts: 137
Likes: 1
From: Phoenix USA
mounting brake controller
I mounted my Tekonsha Prodigy in the cubby hole on my 98 F-150 and it works great. The Prodigy does not have to be level and being in the cubby I never bang my knee on it. You will probably have to use the permanent bracket rather than the removable one but it fit just fine.
Posting Guru
Joined: Jul 2001
Posts: 1,914
Likes: 1
Trending Topics
New User
Joined: Jul 2002
Posts: 5
Likes: 0
mounting brake controller
Well....I took everyone's advice and bought the Prodigy controller...just still not sure where to mount this controller on my F-140 SuperCrew.
I see post's regarding mounting it in the cubbyhole on the F-250...not sure, but I believe the F-150 dash is different. My Prodigy won't even begin to fit into the cubbyhole on my F-150.
Where are most of you guys mounting your Prodigy controller on your F-150's?
Thanks,
Mark
I see post's regarding mounting it in the cubbyhole on the F-250...not sure, but I believe the F-150 dash is different. My Prodigy won't even begin to fit into the cubbyhole on my F-150.
Where are most of you guys mounting your Prodigy controller on your F-150's?
Thanks,
Mark
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Posting Guru
Joined: Jun 2002
Posts: 1,067
Likes: 1
From: Central Illinois
mounting brake controller
>FWIW, the Tekonsha Prodigy and Sentinel can be mounted from 0-90 degrees.
I know this is an old post and probably just a typo, but to set the record straight, my Prodigy instruction sheet only allowed for 0-70 degree mounting. They also warn about mounting it at anything close to 70 degrees because steep grades could be enough to cause problems.
Matt
2002, F250 SD, SC, 8' Bed, V10, 3.73 LS, Arizona Beige, ICI Stainless Step Bars, Truxedo Tonneau, Prodigy Brake Control, Flowmaster 40
I know this is an old post and probably just a typo, but to set the record straight, my Prodigy instruction sheet only allowed for 0-70 degree mounting. They also warn about mounting it at anything close to 70 degrees because steep grades could be enough to cause problems.
Matt
2002, F250 SD, SC, 8' Bed, V10, 3.73 LS, Arizona Beige, ICI Stainless Step Bars, Truxedo Tonneau, Prodigy Brake Control, Flowmaster 40
Thread
Thread Starter
Forum
Replies
Last Post
Munkey
Explorer, Sport Trac, Mountaineer & Aviator
1
Jun 27, 2013 08:04 PM
Tym
1999 - 2016 Super Duty
22
Feb 2, 2006 07:36 AM
rakstr
Explorer, Sport Trac, Mountaineer & Aviator
5
Dec 13, 2003 12:15 PM
