Winter/Spring Projects
Post Fiend
Joined: Aug 2006
Posts: 20,099
Likes: 7
From: Yorkton Sask
sorry, my mistake. frankly, i hate the look of a level truck, i like to see some rake to it. therefore i'd be doing a 3/3 lift/level instead of just the front, thus making the rear higher. the worse part about the levelling kits is that any weight in the bed and they sit ***-heavy...
Posting Guru
Joined: Oct 2005
Posts: 2,114
Likes: 0
From: Langham, SK
That's why I haven't but a leveling kit on the '07, When i drop the fifth wheel on it now she sits nice and level!
As for projects, I need to get the '79 out of storage and running as soon as all the snow is gone, and do the front brakes on her.
I have the wheel bearings to repack/replace on the camper and boat trailer check all lights and brakes on the camper trailer.
I what to finish up my back yard before summer so I have more time to use the camper and boat.
As for projects, I need to get the '79 out of storage and running as soon as all the snow is gone, and do the front brakes on her.
I have the wheel bearings to repack/replace on the camper and boat trailer check all lights and brakes on the camper trailer.
I what to finish up my back yard before summer so I have more time to use the camper and boat.
Post Fiend
Joined: Aug 2006
Posts: 20,099
Likes: 7
From: Yorkton Sask
i guess i just don't see the point of a jacked up pavement queen... i mean why waste the money on lift, big rubber, rims, winches and all that jazz if it'll never be put to use?? just my opinion...
lots of good looking pavement queens out there though!!
lots of good looking pavement queens out there though!!
FTE Legend
Joined: Aug 2004
Posts: 37,887
Likes: 20
From: North Central Rural Sask.
Im not much for a pavement queen either. Nice to look at, but I wanna see it perform!
Im the same way with women though, if they look nice, they better perform as well as they look, or the look is useless!
Senior User
Joined: Apr 2002
Posts: 431
Likes: 0
From: Winnipeg Canada
well i suppose its more of a conservative pavement queen. its not jacked up. just leveled and im probably just going with some SLIGHTLY larger tires. im going to need some soon anyway. im not going any larger than 33's anyway
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Thread Starter
|
Senior User
Joined: Nov 2004
Posts: 435
Likes: 0
From: Regina, Saskatchewan
Got the 557 to finish, I just sunk 4500 into the bottom end, and now have a $4500+ order for Jon Kaase. So I need a second and third job and to sell a few body organs for that.
The 65 needs paint and suspension work, new transmission for the 393, new front sump oil pan. The victor jr's are going to get ported and a new intake setup is on the list too.
The 89 needs to be polished, new K-member for the big block, mini-tub the rear end, cage and new transmisson aswell.
F150, I really want to get 4.88 gears installed this summer and get a Roush Charger for it, then 6" lift and 37's. I need about 5 rich girl friends for all of that, but I am working on it
Then there is the house and garage and back yard that need to get finished.......
So if anyone ever get bored or has nothing to do, I could always use a hand.
Maybe the next Regina FTE meet could be in my garage and include an engine transplant into the 65 
So that is my list and I am sure I have missed a few things...........
The 65 needs paint and suspension work, new transmission for the 393, new front sump oil pan. The victor jr's are going to get ported and a new intake setup is on the list too.
The 89 needs to be polished, new K-member for the big block, mini-tub the rear end, cage and new transmisson aswell.
F150, I really want to get 4.88 gears installed this summer and get a Roush Charger for it, then 6" lift and 37's. I need about 5 rich girl friends for all of that, but I am working on it
Then there is the house and garage and back yard that need to get finished.......
So if anyone ever get bored or has nothing to do, I could always use a hand.
Maybe the next Regina FTE meet could be in my garage and include an engine transplant into the 65
So that is my list and I am sure I have missed a few things...........
Moderator
Joined: Dec 2003
Posts: 97,596
Likes: 2,008
From: Saskatoon, Saskatchewan
Fired up my 56 F350. I`m going to extend the flat deck since the previous owner made it too short so I`ll add another foot or so and a headache rack.
That Y-Block sure starts fie and runs super nice!
That Y-Block sure starts fie and runs super nice!
