install EGT probe
Thread Starter
|
New User
Joined: Mar 2009
Posts: 3
Likes: 0
Senior User
Joined: Feb 2008
Posts: 235
Likes: 0
From: Albany, OR
Anything above 1300 degrees is gambling from what i've heard....
Postmaster
Joined: Jul 2005
Posts: 3,956
Likes: 6
From: Abilene, Texas
install it on the drivers side manifold. its easy to get to from under the truck. and try to stay under 1200 for the most part. running higher than that for extended amounts of time and risk HG failure. 1400 or so is ok for short periods like say 1/8 or 1/4 mile, but I would be careful
Fleet Owner
Joined: Nov 2003
Posts: 27,915
Likes: 3,632
For the installation, I posted a link (with pics) in the other (almost identical) thread you started recently.
Texans and natem8301 have you covered on the temps. Be careful over 1300. Be VERY careful if it hits 1400. Remember, damage isn't always going to give you instant feedback!
Texans and natem8301 have you covered on the temps. Be careful over 1300. Be VERY careful if it hits 1400. Remember, damage isn't always going to give you instant feedback!
