Okay guys (and gals), you have been a tremendous help in the past with all kind of different questions I posted here, so here's one more:

I am planning on adding some more lights to my truck, but I'm running out of room for switches. I already have 4 switches installed on the trim, to the left side of the steering column, and underneath the headlight switch. Already have 2 switches for my roof lights, 1 for the air compressor and 1 for the air horns... so no more room.

I need some creative (and nice looking) ideas for a location for these switches, and like to put all 6 together somewhere.

Any good ideas?



Thanks once again for all your input!

 

I think it is time to put in the f650 panel that some folks are adding in.
https://www.ford-trucks.com/forums/8...-in-the-x.html

 

Have you checked out the F650 lower dash panel thread... lots of cool pics too.

Or...

You could fab up something using the "Upfitter" switches from the SD trucks. Have fun!!!

 

I dont know if anything like this exists, but just today I was thinking that us gasser guys could mount switches in the pillar where the smokers stick all them gauges.