FT motor
Elder User
Joined: May 2004
Posts: 565
Likes: 3
From: saxton pa.
FE's VS FT's
The wrist pins are the same size. I just pulled a set of rods from a 391 to use in a 360 to 390 conversion. As Krewat said 391 to 390 /361 to 360 piston swap works.
Have A Good Day----- Hotwrench
Have A Good Day----- Hotwrench
New User
Joined: Mar 2009
Posts: 2
Likes: 0
hi, i just bought a 76 f 700 with a 361, among other things it could use a tune up, of course when i say 361 at a parts store, they look at me like i have two heads, i know many parts are the same as a 360, but what about tune up parts (plugs, wires, cap and rotor) could i save myself some grief and just say its a 360? if not where could i find tune up parts? thanks
Elder User
Joined: May 2004
Posts: 565
Likes: 3
From: saxton pa.
FE's VS FT's
Mattgrant the tuneup parts are basically the same , but the heavy duty trucks use a different heat range plug.
Pull a plug and get ones with the same number
.
Have A Good Day-------Hotwrench
Pull a plug and get ones with the same number
. Have A Good Day-------Hotwrench
Thread
Thread Starter
Forum
Replies
Last Post
mechmike360
1973 - 1979 F-100 & Larger F-Series Trucks
24
Aug 20, 2014 11:32 AM
pete64
1973 - 1979 F-100 & Larger F-Series Trucks
21
Nov 17, 2012 02:50 PM
