Installed V codes
Super Moderator
Joined: May 2004
Posts: 29,380
Likes: 118
From: Central Coast of CA
Stewart- I left out some information (sorry). I do remember having to remove the rad support blocks. I remember reaching in the front and wrenching them loose to get room for the bolts to come out. It was a little difficult but I was able to do it without dropping the bumper or blocker beam. Who knows. maybe I did it the hard way. But relatively speaking, it was an easy job.
I originally replied to this at work and came back to review my post as i didnt remember what I had left out (knew I left something out). Thanks for clearing it up. The last thing I want to do is misinform someone wanting to do an upgrade. Thanks for the correction.
I originally replied to this at work and came back to review my post as i didnt remember what I had left out (knew I left something out). Thanks for clearing it up. The last thing I want to do is misinform someone wanting to do an upgrade. Thanks for the correction.
Stewart
Senior User
Joined: Nov 2008
Posts: 187
Likes: 0
I also replaced my front springs without dismantling the front bumper set up- was able to reach in and get the brackets out without removing the bumper- also not sure if it was the hard way or not-didnt seem to me that it was that difficult
Thread
Thread Starter
Forum
Replies
Last Post
New Truck Owner
Brakes, Steering, Suspension, Tires, & Wheels
1
May 5, 2004 10:04 AM
