17* HPOP from T.E.
Thread Starter
|
Senior User
Joined: Jan 2007
Posts: 383
Likes: 0
From: Jamestown, Ohio
17* HPOP from T.E.
Got my super duty pump back from Joey at Terminator Engineering today. I can't wait to get it on the truck. I am going to install it Sunday!!!
Is there any tips or tricks to help me? Is there anything else I sould replace at the same time?
Thanks
Is there any tips or tricks to help me? Is there anything else I sould replace at the same time?
Thanks
FOREIGN GURU
Joined: Jul 2006
Posts: 7,655
Likes: 7
From: Celaya, Gto. MX
Hotshot
Joined: Jun 2007
Posts: 10,008
Likes: 7
From: Austin, TX
they got you all fixed up. just make sure to be quite careful with the HPOP gear bolt and washer. you don't want to be the first one to figure out where that bolt goes if you drop it, trust me. just make sure you have a new HPOP gasket and some motorcraft diesel grey rtv on hand and do not use anything other than the motorcraft diesel grey rtv on the HPOP gear cover.. i went to get some from ford and they gave me the wrong stuff so my oil will start to foam up a little after about 500 miles on new oil. i gotta take it off and reseal it with the right stuff. LoL. just read through cody's write up real good and you will be alright.
Thread
Thread Starter
Forum
Replies
Last Post
joegeds
1987 - 1996 F150 & Larger F-Series Trucks
3
Nov 25, 2013 04:35 AM
f1drivr
Brakes, Steering, Suspension, Tires, & Wheels
1
Nov 9, 2001 04:05 PM
etrade
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
5
Aug 14, 2001 03:59 AM
