Clutch fork problems
Thread Starter
|
Senior User
Joined: Aug 2008
Posts: 310
Likes: 31
Clutch fork problems
I was wondering if anyone has any pics of the clutch fork assembly where it attaches to the pivot trunnion in the bellhousing. When i pulled the tranny my anti rattle spring was missing and i have no idea how it goes back together. Does the anti rattle spring hold the clutch fork to the trunnion? i am lost.
Postmaster
Joined: Aug 2005
Posts: 2,760
Likes: 8
From: Gadsden Purchase
Doggonit I tried taking some pictures but the stuff hasn't been cleaned yet and
since it's all the same color and surface texture, can't tell what I'm looking at. :/
Can we start all over?
I guess you are talking about the spring that holds the fork in place?
(while you're putting the engine and transmission together)
I don't suppose that sucker needs to be there after you've got it all together?
Anybody?
And I suppose a guy could get it together without it, the boot and throwout
bearing springs will do a pretty good job of holding it in place?
I just took that stuff apart today.
I'm pretty familiar with it.
Tell me more to go on, I'm guessing too much. :)
Alvin in AZ
since it's all the same color and surface texture, can't tell what I'm looking at. :/
Can we start all over?
I guess you are talking about the spring that holds the fork in place?
(while you're putting the engine and transmission together)
I don't suppose that sucker needs to be there after you've got it all together?
Anybody?
And I suppose a guy could get it together without it, the boot and throwout
bearing springs will do a pretty good job of holding it in place?
I just took that stuff apart today.
I'm pretty familiar with it.
Tell me more to go on, I'm guessing too much. :)
Alvin in AZ
Postmaster
Joined: Aug 2005
Posts: 2,760
Likes: 8
From: Gadsden Purchase
Senior User
Joined: Dec 2005
Posts: 203
Likes: 0
When I pulled the motor and trans during my build that little spring/keeper popped off, and I couldn't find it anywhere. I ordered a new one from LMC... it wasn't much more than a few dollars if I am remembering correctly. The fork wouldn't stay in correctly without it.
Thread Starter
|
Senior User
Joined: Aug 2008
Posts: 310
Likes: 31
Postmaster
Joined: Aug 2005
Posts: 2,760
Likes: 8
From: Gadsden Purchase
On mine the spring is riveted to the fork and the spring would have to break
to "get lost".
Anybody got pictures of the other (older?) type? :)
Alvin in AZ
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 785
From: Simi Valley, CA
I was wondering if anyone has any pics of the clutch fork assembly where it attaches to the pivot trunnion in the bellhousing. When i pulled the tranny my anti rattle spring was missing and i have no idea how it goes back together. Does the anti rattle spring hold the clutch fork to the trunnion?
Fits 6 or V8: 1965/69 F100/350 and 1970 F100/350 before serial number G30,001. After #G30,001 uses a different lever!
GREEN SALES CO. in Cincinnati OH has 11 = 800-543-4959
JST AUTOMOTIVE in Lebanon TN has 1 = 615-443-3086
MILLER OBSOLETE PARTS in Binghamton NY has 1 = 800-546-7278.
----------------------------------------------------------------
C6AZ7562A .. Clutch Release Lever Anti-Rattle Spring / Obsolete
Fits all: 1965/72 cars/trucks.
GREEN SALES has 37
MILLER OBSOLETE has 5
PARTS INTERNATIONAL in Farmers Branch TX has 18 = 888-727-0418
-------------------------------------------------------------------
B9AZ7522A .. Clutch Release Lever Trunnion (Clutch Pivot) / Obsolete
Fits all 1965/72 F100/350's.
PARTS INTERNATIONAL has 1
JST AUTOMOTIVE has 1
DENNIS CARPENTER OBSOLETE PARTS in Concord NC has 4 = 704-786-8139.
ANTIQUE AUTO SUPPLY in Arlington TX has 1 = 817-275-2381.
Trending Topics
Thread Starter
|
Senior User
Joined: Aug 2008
Posts: 310
Likes: 31
I have the parts i just need a pic of how they go together i will figure it out when my spring gets here. It cant be that hard i just was wondering if some one had a pic. I will
post one.
post one.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Postmaster
Joined: Aug 2005
Posts: 2,760
Likes: 8
From: Gadsden Purchase
65-68 CLUTCH LEVER SPRING C6AZ7562A
Used Bill's part number.
It's just a piece of music wire bent into a special shape. :)
A picture would be cool of the assembly,
if it's a good one I'd like to put in my file12. :)
(file13 is trash, so that stuff is one step better than trash;)
Alvin in AZ
Used Bill's part number.
It's just a piece of music wire bent into a special shape. :)
A picture would be cool of the assembly,
if it's a good one I'd like to put in my file12. :)
(file13 is trash, so that stuff is one step better than trash;)
Alvin in AZ
Thread Starter
|
Senior User
Joined: Aug 2008
Posts: 310
Likes: 31
65-68 CLUTCH LEVER SPRING C6AZ7562A
Used Bill's part number.
It's just a piece of music wire bent into a special shape.
A picture would be cool of the assembly,
if it's a good one I'd like to put in my file12.
(file13 is trash, so that stuff is one step better than trash
Alvin in AZ
Used Bill's part number.
It's just a piece of music wire bent into a special shape.
A picture would be cool of the assembly,
if it's a good one I'd like to put in my file12.
(file13 is trash, so that stuff is one step better than trash
Alvin in AZ
Thread Starter
|
Senior User
Joined: Aug 2008
Posts: 310
Likes: 31
Here are some pics of the spring on the fork i guess this is how it goes still not sure its not quite on there but when i give it a little push it goes in place. It holds and with the boot and throw out bearing installed it cant go any where i hope.
Thread
Thread Starter
Forum
Replies
Last Post
eric8
1973 - 1979 F-100 & Larger F-Series Trucks
6
Mar 14, 2017 06:37 PM
yellow truck
1967 - 1972 F-100 & Larger F-Series Trucks
4
Jun 1, 2016 01:26 PM
yellow truck
1967 - 1972 F-100 & Larger F-Series Trucks
14
May 31, 2016 06:58 PM
