Starter Again?
Fleet Owner
Joined: Jan 2008
Posts: 26,898
Likes: 3
From: southern md
the spade terminal is a thorn in my side-it never -never acts up in good sunshiny weather
always nasty cold or when I'm parked over a mud puddle
--I replaced the wire it was bad and put on a new spade connector heavy duty-been okay for about six months-
good luck on that endeavor it will drive ya batty
always nasty cold or when I'm parked over a mud puddle
--I replaced the wire it was bad and put on a new spade connector heavy duty-been okay for about six months-good luck on that endeavor it will drive ya batty
Junior User
Joined: Aug 2006
Posts: 67
Likes: 0
NO My truck is a 87 F250 with a 460 .It only has one wire to it. My problem is the napa starters don't engage the flywheel the way they should.When I used another brand starter it worked fine. The bushing on the flywheel side of the Napa starter wears out in a short time and the starter just spins.
Thread Starter
|
Postmaster
Joined: Aug 2004
Posts: 4,004
Likes: 1
From: North of Boston MA
Okay, who revived this six month old thread and jinxed me? 
Went to use the truck yesterday and got the click again. A couple taps on the starter and I was off and running. Guess it is time for another trip to the AZ....
This time I think I will get the free one and maybe buy another one as a spare. Or maybe just bite the bullet and buy a MC part....
Damnit, I don't have time for this right now.
Went to use the truck yesterday and got the click again. A couple taps on the starter and I was off and running. Guess it is time for another trip to the AZ....
This time I think I will get the free one and maybe buy another one as a spare. Or maybe just bite the bullet and buy a MC part....
Damnit, I don't have time for this right now.
Thread
Thread Starter
Forum
Replies
Last Post
redbug
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
17
Aug 7, 2010 01:45 AM
