Flathead rebuilders
Thread Starter
|
Laughing Gas
Joined: Apr 2003
Posts: 936
Likes: 25
From: La Ronge Saskatchewan
Flathead rebuilders
I am needing a flathead 6 rebuilt (230 Chrysler) and am looking for any recommendations. I have talked to Northside Rebuilders in P.A. and Precise in S'toon, both seemed okay on the phone. Anyone know of a must talk to guy, any tricks for flatheads..............opinions and suggestions starting....NOW
FTE Legend
Joined: Aug 2004
Posts: 37,887
Likes: 20
From: North Central Rural Sask.
For the extra drive I would probably take it to the guys in saskatoon too.
I never got a good vibe when I talked to northside about getting an engine done a few years ago, but thats JMO too.
I never got a good vibe when I talked to northside about getting an engine done a few years ago, but thats JMO too.
Moderator
Joined: Dec 2003
Posts: 97,591
Likes: 2,008
From: Saskatoon, Saskatchewan
Northside used to be excellent but I haven`t been there for a long time.
I`ve heard that Precise was ok too but I`ve never taken anything there.
There`s a small engine machine shop in Martinsville who`s got a stroked and poked full custom 56 F100 that seems ok.
Not much to these simple flat 6`s so I wouldn`t worry about special tricks. There`s a used one for sale, I think it`s a Chrysler?, a 251 Flathead industrial Engine/$500 out of a 1950 Bombardier in Nipawin, Kijiji Saskatoon:
251 Flathead industrial Engine. - Saskatoon Car Parts For Sale - Kijiji Saskatoon
I`ve heard that Precise was ok too but I`ve never taken anything there.
There`s a small engine machine shop in Martinsville who`s got a stroked and poked full custom 56 F100 that seems ok.
Not much to these simple flat 6`s so I wouldn`t worry about special tricks. There`s a used one for sale, I think it`s a Chrysler?, a 251 Flathead industrial Engine/$500 out of a 1950 Bombardier in Nipawin, Kijiji Saskatoon:
251 Flathead industrial Engine. - Saskatoon Car Parts For Sale - Kijiji Saskatoon
Moderator
Joined: Dec 2003
Posts: 97,591
Likes: 2,008
From: Saskatoon, Saskatchewan
Not off the top on my head, I never did catch the name.
I did find a shop in the yellow pages under ''Engines Rebuilding & Exchanging'' called Warman Automotive Rebuilders & Machining-933-3141.
I think this is correct, they were in Warman and I heard they moved to Martinsville.
I did find a shop in the yellow pages under ''Engines Rebuilding & Exchanging'' called Warman Automotive Rebuilders & Machining-933-3141.
I think this is correct, they were in Warman and I heard they moved to Martinsville.
Trending Topics
Lead Driver
Joined: Jan 2006
Posts: 8,423
Likes: 0
From: Colonsay Sk. Canada
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Rezvani's Latest Post-Apocalytic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
Moderator
Joined: Dec 2003
Posts: 97,591
Likes: 2,008
From: Saskatoon, Saskatchewan
Good point, I forgot all about Continental engines......
Used in earlier Massey Harris tractors?
I still think a slant 6 would be cool if there`s room, there tons of them in old swathers & some in afew combines, they seem to go forever.
Used in earlier Massey Harris tractors?
I still think a slant 6 would be cool if there`s room, there tons of them in old swathers & some in afew combines, they seem to go forever.
Thread Starter
|
Laughing Gas
Joined: Apr 2003
Posts: 936
Likes: 25
From: La Ronge Saskatchewan
I had met that fella from Martinsville or Warman 2 summers ago and each summer since. He does have a nice Purple 56 F100. I have tried several times to call his shop but no answer, if i take the engine there i want to be avle to talk to a guy when i need to.
Northside is made up of the old Hackle's employees.
Northside is made up of the old Hackle's employees.
Postmaster
Joined: Oct 2004
Posts: 4,402
Likes: 1
From: Delisle/Vanscoy, Sk.
Northside I had them do a head for me. They charged me way too much.
I deal with Warman Rebuilders. They are just off highway 11 where the south turn into Warman is. They have ahd experience with those old Plymouth 6 cyl. They done lots of older engines. They use to do the work on their farm out of an old garage barn. Move to new shop and built it with overhead booms. They are the Unrah boys. They have other jobs still and if you call inthe evenings they are usually home to answer or return your calls. They have always done so with me. They do good work and anything I have had them do is either still going strong or was going strong when I sold the vehilce.
I give them 2 thumbs up.
I deal with Warman Rebuilders. They are just off highway 11 where the south turn into Warman is. They have ahd experience with those old Plymouth 6 cyl. They done lots of older engines. They use to do the work on their farm out of an old garage barn. Move to new shop and built it with overhead booms. They are the Unrah boys. They have other jobs still and if you call inthe evenings they are usually home to answer or return your calls. They have always done so with me. They do good work and anything I have had them do is either still going strong or was going strong when I sold the vehilce.
I give them 2 thumbs up.
Postmaster
Joined: Oct 2004
Posts: 4,402
Likes: 1
From: Delisle/Vanscoy, Sk.
It would look to be aover $2000.00 When they rebuilt my 300 it cost 1800.00 and years ago they did my slant 6 for my plymouth and it cost $1200, but that was in 2001.
They are usually cheaper than the city shops. Their overhead is less than in the city.
They are usually cheaper than the city shops. Their overhead is less than in the city.
