Stack cover question
Thread Starter
|
Elder User
Joined: Jun 2006
Posts: 750
Likes: 1
Stack cover question
Any of you guys out there with stacks have a cover for the Y pipe?
http://www.powerstrokegogo.com/produ...l_stacks_3.jpg
Something like that is what I am talking about. I know they make them for the Superduty's but not for ours.
Not sure if I should try making my own, or buyin one for a Superduty and cutting and making it fit.
http://www.powerstrokegogo.com/produ...l_stacks_3.jpg
Something like that is what I am talking about. I know they make them for the Superduty's but not for ours.
Not sure if I should try making my own, or buyin one for a Superduty and cutting and making it fit.
Elder User
Joined: May 2007
Posts: 943
Likes: 0
From: North East, MD
be very carefule if you go that route. My gut tells me dont do it. Leaves and debris will get in there over time and could be a fire hazard.
Im thinking on mine I'm going to make a plate flush with the top of the bed that goes between front of bed and toolbox to cover the top to clean it up and keep stuff from falling down there but keep under the box open so i can clean it out just my 2 cents
Im thinking on mine I'm going to make a plate flush with the top of the bed that goes between front of bed and toolbox to cover the top to clean it up and keep stuff from falling down there but keep under the box open so i can clean it out just my 2 cents
