Who makes a good glow plug controller?
Post Fiend
Joined: Nov 2003
Posts: 21,285
Likes: 15
From: Nutter Fort, WV
The AC compressor wires are not in the engine wiring harness.
There are two connectors for the two temps sensors at the front of the drivers side head in the engine harness though.
At the front of the passenger side head there are three connectors for the fuel filter mounted sensors, one connector for the engine temp switch, and three connectors for the IP solenoids.
Back at the rear of the intake manifold, glow plug power, battery power, ignition power and oil pressure sensor feed wire.
I did not find my glow plug controller, I know it is in there somewhere still in the box.
There are two connectors for the two temps sensors at the front of the drivers side head in the engine harness though.
At the front of the passenger side head there are three connectors for the fuel filter mounted sensors, one connector for the engine temp switch, and three connectors for the IP solenoids.
Back at the rear of the intake manifold, glow plug power, battery power, ignition power and oil pressure sensor feed wire.
I did not find my glow plug controller, I know it is in there somewhere still in the box.
Thread
Thread Starter
Forum
Replies
Last Post
Jim Allen
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
1
Oct 1, 2010 01:01 PM
Jim Allen
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
3
Apr 25, 2010 05:51 PM
