Engine movemnt

Reply Subscribe

Thread Tools

Search this Thread

Dec 7, 2008 | 04:05 PM

justin_brandstein

Thread Starter

Senior User

Joined: Nov 2008

Posts: 199

Likes: 0

Engine movemnt

guys im not sure if this is supposed to happen... My 95' when i get on the gas my transfercase lever moves with the motor... Im not sure if this is normal or should it be staying put... Also is it a possible tranny mount?

Dec 7, 2008 | 08:26 PM

justin_brandstein

Thread Starter

Senior User

Joined: Nov 2008

Posts: 199

Likes: 0

Has anyone had any experince with this?

Dec 7, 2008 | 08:34 PM

tseekins

Super Moderator

Joined: Jan 2008

Posts: 40,035

Likes: 1,523

From: Maine, Virginia

Quote:

Originally Posted by justin_brandstein

Has anyone had any experince with this?

I've never noticed my t case lever moving, I'd crawl under it and check tranny / tcase mounts. May need to torque your bolts down a little.

Tim

Dec 7, 2008 | 08:36 PM

justin_brandstein

Thread Starter

Senior User

Joined: Nov 2008

Posts: 199

Likes: 0

thanks for the response i did not know if it was normal

Dec 7, 2008 | 08:41 PM

fordguy300

Senior User

Joined: Nov 2007

Posts: 357

Likes: 0

From: THEHAUTE

mine moves but i have a 4 speed...and i know my engine mounts are shot...might want to check those too.. they wear out as they r like this rubber junk

Dec 7, 2008 | 10:15 PM

Conanski

FTE Legend

Joined: Jun 2006

Posts: 31,930

Likes: 1,499

From: Ottawa, Ontario

Yes check your engine mounts they are probably shot or some of the bolts are broken/missing. The engine/tranny/xfer case are all bolted together so they will all move together, but if the mounts are good it hardly moves at all.

Dec 8, 2008 | 02:31 PM

1966Tbird

Posting Guru

Joined: Dec 2006

Posts: 1,639

Likes: 2

yeah mine moves too and i have poly motor mounts (with a limiting strap) and a new trans mount. not a lot but maybe an inch total, but i also have a 3500 stall and other crap...