Limiting Steering Radius.
Thread Starter
|
Postmaster
Joined: Aug 2008
Posts: 4,092
Likes: 0
From: Olympia
Limiting Steering Radius.
So I put some 37" Super Swampers on my F-350 but when I turn really sharp my tire touches my leaf spring.
So my question is this;
Is it possible to limit my steering radius to prevent the tire from touching the spring? There is not a great deal more that it could turn if the tire did not touch the leaf, and my truck has always turned a little sharper than I think it should so i'd be fine with stopping it just before the leaf.
I would love to know if there is something I can adjust to stop it from touching the leaf.
Buying new wheels is out of the question. If there is no way possible, then just tell me that. :P
Thanks for any and all help.
So my question is this;
Is it possible to limit my steering radius to prevent the tire from touching the spring? There is not a great deal more that it could turn if the tire did not touch the leaf, and my truck has always turned a little sharper than I think it should so i'd be fine with stopping it just before the leaf.
I would love to know if there is something I can adjust to stop it from touching the leaf.
Buying new wheels is out of the question. If there is no way possible, then just tell me that. :P
Thanks for any and all help.
Thread Starter
|
Postmaster
Joined: Aug 2008
Posts: 4,092
Likes: 0
From: Olympia
Thanks! I'll look into that. ( I would now but its fricking cold outside. :P )
I uprooted a tree accidently with an excavator. Actually it fell like 30 minutes after I was done digging. I had not meant to disturb the tree but it was rotted. Anyways I don't have any pictures of it, I cut the axles off with the torch and sent it to the scrap yard. All I have now is the bed which i'm filling with more scrap metal from my property. The bed is just banged up a little. It didnt get touched by the tree. So right now, i'm just working on my F-350. I'm selling one of my quads and I plan to sink about $1500 into upgrading parts.
It should be good.
I uprooted a tree accidently with an excavator. Actually it fell like 30 minutes after I was done digging. I had not meant to disturb the tree but it was rotted. Anyways I don't have any pictures of it, I cut the axles off with the torch and sent it to the scrap yard. All I have now is the bed which i'm filling with more scrap metal from my property. The bed is just banged up a little. It didnt get touched by the tree. So right now, i'm just working on my F-350. I'm selling one of my quads and I plan to sink about $1500 into upgrading parts.
It should be good.
Thread
Thread Starter
Forum
Replies
Last Post
glosol
1973 - 1979 F-100 & Larger F-Series Trucks
54
Jun 12, 2011 03:50 AM
rad1026
1999 - 2003 7.3L Power Stroke Diesel
16
Apr 1, 2010 01:49 PM
crazy4Fords
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
18
Nov 22, 2004 10:23 AM
