eccentric info
Thread Starter
|
Senior User
Joined: Jan 2007
Posts: 184
Likes: 0
From: Ft. Riley, KS
eccentric info
Hello all,
I need some help. I have a 1978 400 and I am building it for towing/ off roading. I bought a Timing gear set the (actual gear to gear not the chain type) from Jegs.com PN# 555-20346 but the sales guy said that this ford engine uses a 2 piece [FONT='Verdana','sans-serif']eccentric a[/FONT]nd this part requires a 1 piece or to use an electric fuel pump. Now up to this point I had thought that my fuel pump runs off the cam. My plan is to install a timing gear set, new cam, cam bearings, MSD Distributer, MSD Ignition, intake carb, headers and flow master mufflers. So are there any pictures of this part? Have any of you guys done this upgrade? And also for a job of replacing the cam are there any good tips?
Thanks Jim
I need some help. I have a 1978 400 and I am building it for towing/ off roading. I bought a Timing gear set the (actual gear to gear not the chain type) from Jegs.com PN# 555-20346 but the sales guy said that this ford engine uses a 2 piece [FONT='Verdana','sans-serif']eccentric a[/FONT]nd this part requires a 1 piece or to use an electric fuel pump. Now up to this point I had thought that my fuel pump runs off the cam. My plan is to install a timing gear set, new cam, cam bearings, MSD Distributer, MSD Ignition, intake carb, headers and flow master mufflers. So are there any pictures of this part? Have any of you guys done this upgrade? And also for a job of replacing the cam are there any good tips?
Thanks Jim
Posting Guru
Joined: Jul 2007
Posts: 1,355
Likes: 1
if you are changing all that, go with the higher cr pistons, go to the sponsor TMeyer, Inc. Precision Automotive Machining....
Thread Starter
|
Senior User
Joined: Jan 2007
Posts: 184
Likes: 0
From: Ft. Riley, KS
Ok so i wont have to get a 1 piece? Also would anyone have some pics of this eccentric? and perhaps can you explan this out a bit more yeah you might have to break it down grade school. Ok 1 more do all the 335s come with a 2 piece? or perhaps some with a 1 piece.
thanks
thanks
Thread Starter
|
Senior User
Joined: Jan 2007
Posts: 184
Likes: 0
From: Ft. Riley, KS
Trending Topics
Lead Driver
Joined: Mar 2004
Posts: 8,922
Likes: 153
All 335's came with a 2 piece. I wouldn't use a 1 piece, just my opinion. I'd probably replace the oil pan gasket too.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
Thread Starter
|
Senior User
Joined: Jan 2007
Posts: 184
Likes: 0
From: Ft. Riley, KS
Hey Mark a. You say to put a thin washer behind the eccentric so as to alow it to spin again. would a reguler washer work? Also why is a 1 piece bad i would think that the 2 piece may fall apart.
thanks
thanks
Lead Driver
Joined: Mar 2004
Posts: 8,922
Likes: 153
It probably would but I'd test fit the pump to make sure it still rides on the eccentric ok. One problem I had with the Ford one piece I got was there is no pin in it. They tryed to tell me it doesn't need one ? So I had to make something up. You can't see it in the picture but I cut a old pin off and tig welded it in. I might have be able to get a longer pin for the cam or shim the factory one out some. I the end I didn't use it once I figured out I could just shim the 2 piece. If you want it pm me. I don't know why Ford used the 2 piece but they do turn a lot easier, less friction I suppose.
Thread
Thread Starter
Forum
Replies
Last Post
FruitPunch
1973 - 1979 F-100 & Larger F-Series Trucks
12
Jan 4, 2010 01:46 AM
TGO
1987 - 1996 F150 & Larger F-Series Trucks
6
Feb 25, 2008 04:34 PM
