Building A 351W Stroker Help.
Thread Starter
|
Junior User
Joined: Oct 2008
Posts: 63
Likes: 0
Building A 351W Stroker Help.
Hello,
I want to put a 351W punched out to a 422stroker. Reason being this engine is going into a 1978 f150 ranger mud bogger. It needs to have enough power to push 44" tires and have those tires spinning all day long in mud.
Any ideas and help this is my 1st project doing and how much will it cost to punch it out to a 422. Its a project engine, What heads should go on, I want the best lumpy cam and what not.
Thanks
Chris
I want to put a 351W punched out to a 422stroker. Reason being this engine is going into a 1978 f150 ranger mud bogger. It needs to have enough power to push 44" tires and have those tires spinning all day long in mud.
Any ideas and help this is my 1st project doing and how much will it cost to punch it out to a 422. Its a project engine, What heads should go on, I want the best lumpy cam and what not.
Thanks
Chris
Thread
Thread Starter
Forum
Replies
Last Post
steven1979
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
14
Jan 7, 2007 10:37 AM
mdh627
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
17
Aug 27, 2003 08:50 AM
