New process 435 manual TX
Thread Starter
|
Senior User
Joined: Sep 2007
Posts: 436
Likes: 0
New process 435 manual TX
i just pulled the TX from the truck and it's a big, messy and heavy thing, with transfer case. My question is what is the best way to clean it to get ready for re-paint. Also what things should i replace while i have it removed, seals, filters???
Super Moderator
Joined: Apr 2004
Posts: 34,481
Likes: 2,801
Putty knife with newspapers at the ready to start.
Pressure wash/steam clean through a shop if there's one nearby.
Solvent, rubber gloves, rags....
Don't use gasoline, it cleans great but the downside is just not acceptable....
Pressure wash/steam clean through a shop if there's one nearby.
Solvent, rubber gloves, rags....
Don't use gasoline, it cleans great but the downside is just not acceptable....
Thread
Thread Starter
Forum
Replies
Last Post
RubberDuck
1994.5 - 1997 7.3L Power Stroke Diesel
1
Jul 29, 2010 05:44 PM
4rdgasm
Clutch, Transmission, Differential, Axle & Transfer Case
3
Oct 29, 2002 10:33 PM
