Super duty lowering help
Post Fiend
Joined: Dec 2002
Posts: 6,245
Likes: 1
From: IL, USA
To lower a 4wd, go with the lightest coils you can up front and adjust/remove rear block to level.
With the 6.0 you might be riding on the bump stops a lot.
You're limited on the 4x4 since you can't have the engine crossmember/front axle/trac bar bracket make contact with each other.
With the 6.0 you might be riding on the bump stops a lot.
You're limited on the 4x4 since you can't have the engine crossmember/front axle/trac bar bracket make contact with each other.
Thread Starter
|
Freshman User
Joined: Oct 2008
Posts: 47
Likes: 0
I looked up the DJM link, but i did not see anything for the F 250 They only listed f150 f350. Maybe i missed something.I found a Ground Force kit on Ebay, but when I went to the Ground Force web sit they did not list a f250 kit.The Desiel Inovation kit looks good i might try them.
Thread
Thread Starter
Forum
Replies
Last Post
Mannella9
1967 - 1972 F-100 & Larger F-Series Trucks
12
Mar 4, 2020 10:55 AM
