I have a 68 f250 w/8 lug and would like to lower it...??? How can I do this? I emailed DJM suspension and the couldn't help so I was thinking doing the basic front drop of cutting the springs but what to do with the back?

All info would help and if you have pictures of a 250 lowered please post.

Thanks!

 

Why butcher a perfectly good work truck???...drive it to Teewanna and swap for a Chebby-changamobile.

 

Lowering blocks would work on the back. Put them between the axle and the springs. If you have helper springs, you can remove those also.

Jim

 

aren't twin I-beams all the same ??

 

Airbagit has an axle flip kit. Here's the link
axle flip kits

 

This is interesting indeed. how does it work, anyone have pics of before and after??

and does it "Level" the truck out? Im looking for the same thing, I think, on the 71 camper special. it will be a weekend show type driver, not a work truck.

 

I think i am going to use the lowering blocks to start and see how I like it.

 

I haven't ordered my kit yet but with the f250s the axle is under the leafs so you would have to do an axle flip before you can use blocks

 

True, if you used the blocks with the axle under the leafs, it would raise the truck. Was not aware of that. My F-250 had the springs under the axle, however it was a 76 2wd.

Jim

 

This may be an option, last week I went to Hillsboro Oregon for some bump parts. The seller also had a set of 67-72 F250 lowering beams with the Camper Special disc brake spindles and caliper brackets. He might still have them, I think his price was $400. for the set. If your interested, PM me, I'll try and find his number and ask if they're still available.

 

how it going, i just purchased a 68' 8-lug and I'm running into the same problem. Do you know who sells lowering beams for this truck?
thank you

 

AIM drop beams for an F250 are available thru airbagit.com

Do you research and caveat emptor

 

Hi im asking if this lowering kit is still able to buy?