NP205 Spline Count
Thread Starter
|
Cross-Country
Joined: Feb 2006
Posts: 90
Likes: 0
NP205 Spline Count
I tried several searches and couldn't come up with an answer. Does anybody know the spline count for the input and output shafts on my divorced np205? Its out of a 74 if that makes a difference. Thanks.
Elder User
Joined: Apr 2003
Posts: 502
Likes: 0
Input spline count is 31
Front and rear output spline count is 32-yokes can interchange.
The F250 version I believe uses a thicker yoke-seal surface.
Not the best low range ratio, but I have seen them take alot of abuse-from a 1200hp mud bogger.
Front and rear output spline count is 32-yokes can interchange.
The F250 version I believe uses a thicker yoke-seal surface.
Not the best low range ratio, but I have seen them take alot of abuse-from a 1200hp mud bogger.
Thread Starter
|
Cross-Country
Joined: Feb 2006
Posts: 90
Likes: 0
This is a 74 F250. Does anyone make a 1410 series yoke that will work with the 31 spline input shaft? All I can find is 1410 series yokes for 32 spline shafts. This is a sled puller and thats why I want to run the 1410 series.
Elder User
Joined: Apr 2003
Posts: 502
Likes: 0
Thread
Thread Starter
Forum
Replies
Last Post
302flareside1992
Clutch, Transmission, Differential, Axle & Transfer Case
2
Apr 7, 2017 11:05 PM
piratius
Clutch, Transmission, Differential, Axle & Transfer Case
2
Aug 5, 2012 04:39 PM
Scot
Clutch, Transmission, Differential, Axle & Transfer Case
1
Sep 3, 2002 02:31 PM
rfitz
Clutch, Transmission, Differential, Axle & Transfer Case
3
Mar 25, 2001 12:36 AM
