Borg Warner 1345???
Thread Starter
|
Senior User
Joined: Mar 2010
Posts: 306
Likes: 0
Borg Warner 1345???
I just did a C6 swap into my truck and the tranny had a 1345 tcase mated to it. I am trying to convert to a CV style shaft to help with the driveline angles. I am having a pretty hard time sourcing the flange i need to convert to CV.
By my count the output shaft of the tcase is a 32 spline. Which I thought was only for a 1350 joint and yoke. But the thing had a 1330 yoke on it so I guess I was wrong there.
But, that is besides the point. My question is, I found a 32 spline flange for a NP205. Will that fit on the 32 spline BW1345? For the life of me I cannot find a flange for the BW1345
All insight is appreciated, thanks in advance.
By my count the output shaft of the tcase is a 32 spline. Which I thought was only for a 1350 joint and yoke. But the thing had a 1330 yoke on it so I guess I was wrong there.
But, that is besides the point. My question is, I found a 32 spline flange for a NP205. Will that fit on the 32 spline BW1345? For the life of me I cannot find a flange for the BW1345
All insight is appreciated, thanks in advance.
Thread
Thread Starter
Forum
Replies
Last Post
swampthang
1973 - 1979 F-100 & Larger F-Series Trucks
6
Mar 23, 2018 10:30 AM
302flareside1992
1987 - 1996 F150 & Larger F-Series Trucks
2
May 28, 2014 07:58 PM
cabloom300
1973 - 1979 F-100 & Larger F-Series Trucks
18
Aug 30, 2011 05:45 PM
thebeastof1980
Clutch, Transmission, Differential, Axle & Transfer Case
1
Jul 29, 2011 08:05 AM
