When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Thanks Neal, and i also want to thank you for all of the information you have been providing, this should really really come in handy in a few weeks when i start my laundry list of mods. And i will deffinetly go with beans if you have had a good experience with them, as they are only 100$ more than Wide Open Performance.Richard
Thanks Neal, and i also want to thank you for all of the information you have been providing, this should really really come in handy in a few weeks when i start my laundry list of mods. And i will deffinetly go with beans if you have had a good experience with them, as they are only 100$ more than Wide Open Performance.Richard
Yes and beans will throw in the second cooler tube and the 3" y-pipe if you want all for free. I don't think the others will do that for you.
Thank you for all thge compliments but some of the credit should go to my brother Jason as well and Beans for most of the pretty stuff.
I was just hoping to post this stuff up here to help some of these other guys that are doing it DIY style and to help persuade others if this is what they want.
You know guys we are all just here to help each other. That is what it is all about.
Luke that is a compliment from you. Check out the oics and give me all suggestions you have. You think I can hit 12,52? Just kiddin, I have the Z tranny I don't think it can compete with a BTS tranny.
Huck. PM me we will get together. I can come to your neck of the woods or we meet in the middle.
Neil that looks really good, I wish my engine compartment looked half as clean as yours. So how did you do the oil return? And here are some more pics that you can't see.
For the fuel return I used a 45 in the head.
here you can see where I notched the plenum to fit around the fitting
I tried to take a pic of the GPR bracket but theres just to much stuff in the way so all I got was a lousy pictures. I trimmed the bracket and mounted it on the studs that I removed from the rear of the drivers side valve cover
I see now Rodney. Yes a 45* fitting would have helped me out a bunch
Looks great Neal, I know how excited you was about doing this at the Ex meeting its good to see it done and running. We'll have to meet up sometime and see this beast in person.