my old cigarette lighter went bad and i got a new one i took the two wires off it in the back of it back i still cant get it to come out,what is holding it in there?...my truck is a 95 250....sorry i posted this here but i dont really know where to post it on here im sure one of you guys knows thanks guys..the beers on me!

 

Don't bother fixing it, smoking is bad for you anyway!!

 

i just replaced mine in a '75, yours should be similar. unhook neg bat cable, spray a little wd-40 in lighter socket, give it a minute or two. now it gets a little tricky, you probably have to find a way to hold the backside in place while you unscrew the front. i was able to take my ashtray out and reach behind the dash to hold it gently (you do not want to crush the sleeve). i used a screwdriver to turn the socket out. again, make sure the bat is unhooked, clean up any wd-40 before you hook bat back up. hope this helps.