Spare Tire

Reply Subscribe

Thread Tools

Search this Thread

Aug 25, 2008 | 07:36 PM

pdqford

Thread Starter

Logistics Pro

Joined: Jan 2001

Posts: 3,740

Likes: 37

From: Central NYS

Spare Tire

Just curious, but what is the correct way to stow the spare? Valve stem facincg down or valve stem facing the the underbody?

Aug 25, 2008 | 07:46 PM

cbradford

Fleet Owner

Joined: Dec 2006

Posts: 20,637

Likes: 37

From: Lost in Pa.

I stow with valve stem down so I can check tire pressure without removing. But other than that I don't think it matters

Aug 25, 2008 | 09:40 PM

saberworks

Junior User

Joined: Aug 2008

Posts: 80

Likes: 0

I recently had a flat and there is actually a way to do it according to the manual. But I forgot what it was. I don't know their reasoning, though.

Aug 25, 2008 | 10:56 PM

alloro

Fleet Owner

Joined: Apr 2008

Posts: 24,323

Likes: 5,132

From: 0,0,1

I'm with cbradford, stem down to be able to check the tire pressure. Also, a lot of road crud ends up sitting on top of the tire, so if the good side is up and you ever need to use it, expect to be embarrassed until you get it off again.

Aug 26, 2008 | 12:04 PM

04markIII

Elder User

Joined: Jun 2006

Posts: 980

Likes: 0

From: Lunenburg, MA

im pretty sure my manual says v/s up, but maybe thats because i have the tpms.

Aug 26, 2008 | 01:17 PM

cbradford

Fleet Owner

Joined: Dec 2006

Posts: 20,637

Likes: 37

From: Lost in Pa.

04markIII think you are correct, however I think it makes more sense to put V/S down for ease of air pressure check, now if you do lots for serious offroading then you will want the V/S up due to the possibility of breaking it off then spare is NG