Wheres The Hole
Thread Starter
|
Senior User
Joined: Dec 2001
Posts: 106
Likes: 0
From: Calgary Alberta
Wheres The Hole
I have a 1993 F150 with a 302 engine I just changed the engine and put in a 1996 302 the problem that I have encountered is that I used my 1993 wireing harness and computer and now have a trouble code #31 EVP sensor /Inlet air Temperature sensor because there is no hole in the intake for the sensor What do I do?
Posting Guru
Joined: Feb 2000
Posts: 1,100
Likes: 0
From: Wichita USA
Wheres The Hole
Here is a possible solution. This sensor just monitors incoming air temp. So it can do this at the intake or anywhere in the intake airstream. Both GM and Chry put them in the airfilter box. Look at that option. Install it in the filter box (rubber grommet and drilled hole) or in the duct from the filter to the throttle body. Extend the wire with solder and shrink tube.
Thread
Thread Starter
Forum
Replies
Last Post
jeff9942
1987 - 1996 F150 & Larger F-Series Trucks
26
Mar 4, 2022 01:50 PM
bflo1220
Explorer, Sport Trac, Mountaineer & Aviator
2
Jul 31, 2014 12:22 AM
mrl390
Clutch, Transmission, Differential, Axle & Transfer Case
1
Nov 10, 2006 06:02 PM
