Ford Truck Enthusiasts Forums - View Profile: sparky

sparky is gaining momentum as a positive member of FTE.sparky is gaining momentum as a positive member of FTE.

sparky sparky is offline

Posting Guru

Visitor Messages

Showing Visitor Messages 1 to 6 of 6
  1. sparky
    04-10-2011 09:18 PM - permalink
    Well I wrote that quite a while ago, maybe 1998, but that being said I can't think of any measurements you would need, Axle should bolt right in in the same place and then it is just a matter of fitting the steering box. As for pics, I never had a digital camera at that time and the truck has long since been traded away. Sorry I am not much help but good luck... I do not recall the swap being that difficult.
  2. Jam21
    04-10-2011 12:22 PM - permalink
    Just read your article on the power assist to real power steering on FTE, and first i want to say thank you. Don't know how long ago you wrote that, but i will use that as a guide as i start my conversion. I do have a couple of questions for you. I am about to remove parts from my donor truck, in my case i'm going to replace the front axel at the same time to make the disc brake conversion. Is there any measurements i would need to take from the donor truck before i remove the axel/steering pieces? Also, do you have any pictures of your procedure or of the finished project?
    Once again, thank you for your time
  3. sparky
    08-28-2010 12:40 PM - permalink
    Wow I wrote that a long time ago but I found it in the tech section.
    Power Assist To Power Steering Conversion On An F250 4x4 .: Articles
  4. njstang87
    08-27-2010 09:35 AM - permalink
    Sparky I have been combing the forum for the tech article you wrote on the power steering conversion with no luck in finding it. I looked under tech guides and didn't even see anything that had to do with power steering. All your help would be greatly appreciated. Thanks
  5. sparky
    07-01-2010 11:36 AM - permalink
    Sure just drop me a PM (private message) and we can discuss it at length.
  6. EAuckland
    06-28-2010 04:57 PM - permalink
    sparky, i saw in one of your posts you where talking about wiring for an early bronco. I need some help with mine, as i am apparently stupid. i have a 1970 Bronco. Thanks, Eddie

About Me

  • About sparky
    Comox Valley, Canada
    wrench turning full time on aircraft, part time on cars/trucks
    2 Letter State/Province (use "--" for outside USA/
    Country of Residence
    Current Mileage
    100,000 - 124,999
    Miles per year
    1,000 - 4,999
  • Signature

    Junk is something you've kept for years
    and throw away three weeks before you need it.


Total Posts
Visitor Messages
General Information
  • Last Activity: 10-18-2017 05:05 PM
  • Join Date: 06-03-1999
  • Referrals: 0


Showing Friends 1 to 2 of 2

All times are GMT -5. The time now is 01:50 AM.