removing bed
Thread Starter
|
Senior User
Joined: Mar 2003
Posts: 195
Likes: 0
From: Mapleview,Mn.
removing bed
I am going to replace the bed on my 93 Ranger.I need to unbolt the filler tube,unhook the elec. to the lights and unbolt the bed,is there any thing else to remove?
Post Fiend
Joined: Jan 2003
Posts: 9,748
Likes: 16
From: Connecticut
Check out:Ford Truck Enthusiasts Forums - View Single Post - 94 Ranger Pickup Box Removal.
You'll need a T55 torx socket for the bolts.
You'll need a T55 torx socket for the bolts.
Lead Driver
Joined: May 2004
Posts: 6,461
Likes: 6
From: Abilene Kansas
Matt
Tuned
Joined: Dec 2002
Posts: 265
Likes: 2
From: Cleveland
I replaced mine with hex heads with a standard thread and new tinnerman nuts both from McMaster Carr. The bolts at the dealership were outrageous, no surprise there. The tinnerman nuts just clip onto the edge of the frame.
