Leveling Kit and wheel questions
Thread Starter
|
New User
Joined: Jun 2008
Posts: 23
Likes: 0
Leveling Kit and wheel questions
Hey guys and gals...thanks for all of the info from previous posts...installed my tires and have a leveling kit for the front being delivered today! It is a 2" kit and the question is...is there anything else that will need to be done with the install of this kit? I would assume that no other modifications are necessary due to the amount of lift....I have an '01 lim v-10 4x4....also, the offset on the stock wheels...anyone know the amount and what would I need to run 35's in the future as far as the wheels go...(aftermarket offset needed), I am looking at upgrading those soon with the opportunity to go larger, later.....as always, I appreciate any and all input....thanks!
Post Fiend
Joined: May 2006
Posts: 10,007
Likes: 4
From: Central Florida
When we had a 2" leveling kit on my truck, the 35" tires just did rub with the stock wheels, with the 4" and stock wheels, I only rub at full lock.
2" should be fine, just make sure your brake lines are long enough if you don't get a new bracket.
2" should be fine, just make sure your brake lines are long enough if you don't get a new bracket.
Thread Starter
|
New User
Joined: Jun 2008
Posts: 23
Likes: 0
ReAx...so you are saying that the 2" leveling kit should be enough to run the same 315-75r-16...on stock wheels?...your truck looks great and they seem to be the same wheels I have...did you use any spacers to help accomodate the larger tires?
Thread
Thread Starter
Forum
Replies
Last Post
hotroddoc
1948 - 1956 F1, F100 & Larger F-Series Trucks
7
May 11, 2005 09:01 PM
