When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I recently installed a tilt column from a '77 f150 into my '66. I'm now trying to hook up the wiring and have become very confused. I have wiring diagrams for '65-'79 and all of them show wires which are not present in the column I've installed. I have been able to determine some of the connections but have been stymied.
My column has the following leads:
yellow
light green/red
orange/blue
light blue
light green
white/red
light blue/red
dark blue
light green/white
white/blue
the schematics show i need the following;
red/black
green/white
yellow/black
green
white/blue
white/red
blue
something is sure goofy here and i'm hoping one of you can help.
much appreciated.
I have the schematics from '65-'78. The problem is that the codes showing in the schematic don't jibe with what's coming out of the column. I have traced which wire is which in the harness. But, until I determine what the proper codes are for the new column, I can't mate the old with the new. I'll check the other threads, but fear I'll find the same thing.