Eaton Posi installed
Thread Starter
|
Elder User
Joined: Jan 2008
Posts: 682
Likes: 4
From: Ontario Canada
Eaton Posi installed
This past weekend I installed the Eaton Posi I purchased from Randys Ring & Pinnion (good guys to deal with), this little upgrade makes the truck run totally different, no more one wheel peel out on wet grass, and just the way it puts power too the wheels is a great improvement!
I recomend this upgrade for sure!
I recomend this upgrade for sure!
Thread Starter
|
Elder User
Joined: Jan 2008
Posts: 682
Likes: 4
From: Ontario Canada
about $600 and a couple new carrier bearings, and good to go! not sure about fuel economy? not too worried about that with this update. just glad it doesnt allways spin out on one wheel.
Logistics Pro
Joined: Mar 2002
Posts: 3,881
Likes: 84
From: Wake Forest, NC
What lube did you use? I used royal purple 75/140 syn in mine, but the install notes said to use 80w90 dino. I get some chattering. I figured the lube was more a function of the gears/bearings than the LS, but I didn't research it much.
