code 1451, finally got around to checking it
Thread Starter
|
Posting Guru
Joined: May 2006
Posts: 2,486
Likes: 0
From: Iowa
code 1451, finally got around to checking it
Well i posted awhile back about an EVAP code but didn't know what it was. Well the code is 1451, Evap circuit malfunctions. Throws the code every time i start the truck but doesn't come back until i start the truck again.
Burns
Burns
Senior User
Joined: May 2006
Posts: 136
Likes: 0
I unplugged the electrical connector to the evap solenoid while the engine was running and threw a code, but I won't swear that it was 1451. I'm not with my truck now or I'd check. I believe the 1451 code is specific to evap electrical circuit issues and not triggered by leaks (bad gas cap, etc.). Bad wires on the charcoal cannister end of the circuit maybe? Here:
https://www.ford-trucks.com/forums/5...ol-system.html
https://www.ford-trucks.com/forums/5...ol-system.html
Hotshot
Joined: Jan 2004
Posts: 19,768
Likes: 1,082
From: St Louis
Did you check the wiring as was suggested in the other thread?
Have you checked the solenoid coil to make certain it is not open?
Checked for corrosion in the connector?
Lots of simple stuff to check first.
Steve
Have you checked the solenoid coil to make certain it is not open?
Checked for corrosion in the connector?
Lots of simple stuff to check first.
Steve
Thread
Thread Starter
Forum
Replies
Last Post
tapper95
Explorer, Sport Trac, Mountaineer & Aviator
28
Oct 11, 2020 07:37 PM
rogerranger2122
1983 - 2012 Ranger & B-Series
2
Oct 3, 2016 09:09 AM
lgeiger13
Modular V8 (4.6L, 5.4L)
31
Jul 22, 2016 10:53 PM
dstewart5
1983 - 2012 Ranger & B-Series
2
May 8, 2007 07:09 AM
