blow back through intake
Musta been a Chiltons, Helms has it.
Posting Guru
Joined: Nov 2001
Posts: 1,743
Likes: 2
From: Ft Scott
hhmmm, mine has it:
SECTION 03-01D Engine, Diesel, 7.3L
03-01D-29
(3) CAUTION: Failure to follow the next step of this procedure could result in bent valves, causing severe engine damage.
Rotate the engine until the mark on the crankshaft damper is at 11 o'clock to prevent valve damage when installing the intake rocker arm and exhaust rocker arm.
SECTION 03-01D Engine, Diesel, 7.3L
03-01D-29
(3) CAUTION: Failure to follow the next step of this procedure could result in bent valves, causing severe engine damage.
Rotate the engine until the mark on the crankshaft damper is at 11 o'clock to prevent valve damage when installing the intake rocker arm and exhaust rocker arm.
Thread Starter
|
Senior User
Joined: Jun 2007
Posts: 369
Likes: 0
ya mine has it too!
to bad i didnt read that section.......
i only read the section about removal and install of the injectors..... never thought to read the rocker arm section.
lesson learned dont question the gurus!
to bad i didnt read that section.......
i only read the section about removal and install of the injectors..... never thought to read the rocker arm section.
lesson learned dont question the gurus!
Thread
Thread Starter
Forum
Replies
Last Post
Adamtgarner
1983 - 2012 Ranger & B-Series
2
Jun 17, 2016 07:02 AM
wagners
1987 - 1996 F150 & Larger F-Series Trucks
8
Oct 9, 2012 08:11 AM
